RepairRV repair & service
Water heaters, leaks, black tanks, electrical and the things nobody else wants to crawl under. Diagnosed, then fixed right.

Enoch · Cedar City · Southern Utah
RV and trailer repair, parts, custom upholstery and premium storage, all in one shop in Enoch. Owner-run, done in the details, and ten minutes from Cedar City.
Brandon, 20+ years in the trade, in Iron County since 2012
Cleaned, measured and checked before anything is swapped
On the shelf in Enoch, not a week away by mail
Storage, service and upholstery in one place
Your one-stop RV shop
Repairs and running gear in the shop, upholstery at the bench, parts on the shelf and a secure yard out back. Every photo on this site is from the shop’s own feed. There is no stock photography anywhere on it.
RepairWater heaters, leaks, black tanks, electrical and the things nobody else wants to crawl under. Diagnosed, then fixed right.
Running gearSpindle bearings, brakes and the wiring behind them. Cleaned, measured and checked, not just swapped.
UpholsteryRV interiors, dinettes, captain’s chairs, equipment seats and custom e-bike seat covers. Enoch and Cedar City’s upholstery shop.
StorageA secure fenced yard with a water fill, a dump station, winterization and spring inspections included. More than a place to park.
SeasonalEnoch sits at 5,500 feet. Lines get blown out and protected before the first hard freeze, and gone over before the first trip back out.
PartsParts stocked locally so a repair is not waiting a week on shipping, and rentals for the trip you are not ready to buy a rig for.
Not sure what it needs? Text a photo to 435-263-8339 and ask.
Premium RV storage · Now open
Your RV deserves better than sitting in the driveway all winter. The yard in Enoch is fenced and secure, with water and a dump station on site, and it sits right beside the shop, so the rig gets looked after while it waits.
Winterization in the fall and an inspection in the spring come with the spot. Park it, prep it, fix it, and get it ready for the next adventure, all in one place.
Reserve a spot
50% offYour first month · Sep & Oct
Space is limited. Or call 435-263-8339.
From the shop floor
Axles and brakes, a black tank leak, an equipment seat, a nest of evicted tenants. The actual jobs, straight off the feed, with what Brandon said about each one.
Follow @iron_rv_adventures
New spindle bearings and brakes on a 3.5k axle set. Rewired while it was apart, no wire nuts.
Equipment seat in Olympus Slate vinyl, new foam and hog rings.
A black tank leak, found and fixed. Somebody has to.
A custom e-bike seat cover, built to stand out.
Evicted tiny tenants. The cleanup and the chewed wiring, handled.
Tech tip: clean off the old thread locker before new goes on.
The yard, the day the banner went up in Enoch.
Premium storage. More than just a place to park.
Open for business, from inside the shop.And moreEvery job, on the feedHow it works
Tell us what the rig is and what it is doing. A photo of the problem is worth a paragraph about it.
Inspection and troubleshooting first. You hear what is wrong and what it takes before any parts are ordered.
Clean things first, take the time, measure the components and check the little things. Not just replace parts.
Picked up from the shop, or parked in the yard until the next trip. Winterized and spring-checked if it stays with us.

Store today. Adventure tomorrow.

Who is working on your rig
Iron RV Adventures is Brandon Beesley’s shop. He has lived and worked in Cedar City and Enoch since 2012 and brings more than twenty years of hands-on experience, plus multiple certifications and a degree from Southern Utah University.
The upholstery comes from years at the bench, and the repairs come from a habit of doing it once and doing it right. It is honest dealing, the kind that still works on a handshake, for first-time RVers and seasoned travelers alike.
“Clean things first. Take the time, measure the components and check for the little things. That’s the difference you will get.”Brandon Beesley, on the feed
Straight from the shop
One verified review so far, from the etrailer installer network, and two rules off the feed that explain it.
Customer review
“Did the job as explained and had the best price. Close to home.”
Tech tip
“Anytime you remove hardware with a thread locker, clean off the old stuff before putting new thread locker on and tightening down.”
Shop rule
“I don’t believe in wire nuts. It’s important to clean things first and not just replace parts. Take the time, measure the components and check for the little things.”
Where we serve
The shop is off Minersville Hwy in Enoch, ten minutes from Cedar City. Rigs tow in from all over Southern Utah, from Brian Head down to St. George.
Off Minersville Hwy, turn at 3600 N.
Book the shop
Tell us what it is and what it needs. Repairs, upholstery, parts and storage spots all start here, and Brandon calls you back to set a time.